No heat? Call (587) 741-8880Smell gas? Leave the house, then call 911 or ATCO 1-800-511-3447

Home / Guides / Costs and prices

Furnace repair cost in Edmonton (2026)

Typical ranges for common furnace repairs, taken from published Canadian price guides. These are guides, not Edmonton quotes. Your price depends on the furnace, access and what the technician finds.

Typical repair prices

RepairTypical range
Diagnostic / service call only$80 to $150
Flame sensor$75 to $200
Igniter$150 to $300
Gas valve$300 to $700
Blower motor$300 to $650
Control board$400 to $900
Heat exchanger (often means replace)$500 to $1,500

What changes the price

  • Furnace brand and age: older or less common models can have harder-to-find parts.
  • Access: a furnace in a tight space takes longer to work on.
  • After-hours calls: ask about any evening or weekend fee before the technician comes out.
  • Whether the diagnostic fee is credited toward the repair.

Repair or replace?

A common rule of thumb from Hydro One: repair when the cost is well below half of a new unit and the furnace is under about 15 years old. Past that, replacement is worth pricing. Use the repair-or-replace tool or see new furnace costs.

Get a number for your furnace

Use the cost calculator to combine repairs, then ask for a written quote.

How to read a repair quote

A good quote lists the part, the labour and any service call or diagnostic fee as separate lines. Ask the contractor to name the part that failed and explain why it failed, because a part that fails again soon points to a deeper problem. A quote that says only "furnace repair" with one total makes it hard to compare with another.

Cheaper problems and costly ones

Many no-heat calls come down to a dirty flame sensor, a worn igniter or a clogged filter, which sit at the low end of the table above. The expensive end is a cracked heat exchanger, a failed control board or a gas valve on an older furnace. When the repair is on the costly list, getting a second opinion and pricing a replacement is reasonable.

Preventive care can keep the cheap problems from becoming costly ones. A yearly tune-up checks the flame sensor, burners, venting and safety switches before the cold season.

Questions to ask before you approve work

  • Is there a service call or diagnostic fee, and is it credited toward the repair?
  • Is the part new, and what warranty covers the part and the labour?
  • Will you give me the price in writing before starting?
  • What happens if the problem is not fixed by this repair?
  • Are there fees for evenings or weekends?

Warranty and old parts

Check whether the furnace is still under the manufacturer's warranty before you pay for a part. Many furnaces carry a parts warranty for a number of years, though labour is usually separate. Keep the receipt and the model and serial numbers, which are on the label inside the furnace door.

Want numbers? Try the cost calculator or the repair-or-replace tool.

Frequently asked questions

How much is a furnace repair in Edmonton?

Published Canadian guides put most single repairs between about $75 to $650, plus a diagnostic of $80 to $150. Major parts such as a heat exchanger cost more.

Should I pay for a diagnostic?

Yes, a diagnostic is how you get an accurate price. Ask whether the fee is credited if you go ahead with the repair.

Why do prices differ between contractors?

Contractors set their own labour rates, parts markups and service call fees, and the same fault can take different amounts of time on different furnaces. Asking for an itemized quote is the way to compare fairly.

Sources

  1. HomeStars: furnace repair cost in Canada (2026)
  2. furnaceprices.ca: Edmonton and Alberta furnace pricing
  3. Hydro One: furnace repair or replace

Figures are guides, not quotes. Prices and rules change; confirm with your contractor and the City of Edmonton. Last reviewed November 2026.

Need heat back on in Edmonton?

Call now to reach a local technician, or send a quick request.

Call nowQuote